Analysis Using the Weibull Distribution in the Evaluation of the Quality of Red Ceramic Incorporated with Sugar Cane Bagasse Ash
DOI:
https://doi.org/10.70597/ijget.v5i1.467Palavras-chave:
Weibull, Waste, Quality, AshResumo
The quality of incorporate red ceramic with 10% sugar cane bagasse ash using the Weibull distribution is investigated. Emphasis was given the influence of the grain size of the sugar cane bagasse ash in the resistance for diametrical compression. Three different sugar cane bagasse ash grain sizes were used: 150 µm (100 mesh), 75 µm (200 mesh) and 44 µm (325 mesh). Samples were prepared by uniaxial pressing and sintered at 950 ºC. The following Weibull parameters were obtained: Weibull module (m), characteristic resistance (σ0) and correlation coefficient (R). The results indicated that the red ceramic MC 325 presented better quality in terms of the mechanical behavior determinate through resistance for diametrical compression.
Referências
Campos, Y.P.R., Sousa, T.A. and Fernandes, R.S., 2020. Estudo do módulo de Weibull aplicado em dados de ensaio de microdureza em cerâmica de Al2O3. Brazilian Journal of Development, 6(9), pp.73840-73852. https://doi.org/10.34117/bjdv6n9-734.
Fonseca, E.S., Tavares, F.G., Sousa, T.N.R. and Morais, W.A., 2015. Associação entre a morfologia de trincas de pisos cerâmicoss e seu comportamento mecânico em fratura. Cerâmica, 61(359), pp.303-308. https://doi.org/10.1590/0366-69132015613591915.
Junior, S., 2000. Engineered Materials Handbook, Ceramics and Glass. USA: ASM International.
Pinheiro, B.C.A. and Holanda, J.N.F., 2010. Efeito da temperatura de queima em algumas propriedades mecânicas de cerâmica vermelha. Cerâmica, 56(339), pp.237-243. https://doi.org/10.1590/S0366-69132010000300005.
Pinheiro, B.C.A., Estevão, G.M. and Vitor, R.R., 2014. Aplicação da estatística de Weibull na avaliação da tensão de ruptura a flexão de revestimento cerâmico. Revista da Estatística da UFOP, 3(3), pp.169-173.
Rocha, D.A.P. and Morais, W.A., 2020. Análise dos dados de vida para ativos industriais utilizando a distribuição de Weibull 3P. Tecnologia em Metalurgia, Materiais e Mineração, 17(1), pp.53-60. https://doi.org/10.4322/2176-1523.2020203.
Siqueira, F.B., Amaral, M.C., Bou-Issa, R.A. and Holanda, J.N.F., 2016. Influence of industrial solid waste addition on properties of soil-cement bricks. Cerâmica, 62(363), pp.237-241. https://doi.org/10.1590/0366-69132016623631969.
Tavares, F.G., Morais, W. A., Fonseca, E.S. and Sousa, T.N.R., 2014. Analysis using the Weibull distribution with two and three parameters to determine the flexural strength of Ceramic Materials. Unisanta Science and Technology, 3(2), pp.76-81. Available at: <https://periodicos.unisanta.br/index.php/sat/article/view/326> [Accessed 21 January 2022].
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Copyright (c) 2022 International Journal of Geoscience, Engineering and Technology
Este trabalho está licenciado sob uma licença Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All articles published in this journal are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.
